G'day! Prepping a frame for the Lockwood ES9000? This is the "Big Brother" of electric strikes—it can open even with 25kg of pressure pushing against it (pre-load), which is a lifesaver for doors with thick seals or aircon pressure dramas.

Since the official template is usually a sticky-label, we've provided the technical dimensions here. You'll need to mortice the frame to 176mm x 28.5mm. If you're retrofitting from an older ES2000, keep an eye on your depth, as the ES9000 has a slightly different profile to accommodate the pre-load motor.

Critical Installation Specs:

• Cut-out Size: 176mm (H) x 28.5mm (W) x 26.5mm (D).
• Voltage: Multi-voltage 10-30VDC (Auto-sensing, no jumpers needed!).
• Monitoring: Fully monitored (Solenoid and Latch/Door state).
• Mode: Field changeable from Fail-Safe to Fail-Secure.

Mate's Advice: Before you lock it into the frame, make sure you've set your PTL (Power-to-Lock) or PTO (Power-to-Open) mode using the screw on the back. It’s a lot easier to do on the bench than once it's wired up in the jamb! Print this guide at 100% scale to verify the faceplate dimensions.